Skip to main content
Do it YourselfPlumbingSafety

How to Thaw Frozen Pipes

By December 9, 2016April 12th, 2023No Comments
how to thaw frozen pipes, How to Thaw Frozen Pipes

A frozen pipe is not an issue that can wait for warmer weather. It is important to thaw out your frozen pipes to prevent pipe bursts and potential flooding to your property immediately. However, it’s even more important that this process is done safely and correctly. Here’s how:

Determine which pipes are frozen and open their faucets

While some frozen pipes end up looking more like icicles than drainage systems in the winter, others are not so simple to locate. If your faucet won’t turn on or is only a trickle, it could mean that your pipe is frozen somewhere along the way. Exposed frozen pipes might have some frost on them, or there might be a slight bulge indicating a blockage.

Once you’ve determined which pipes are frozen, open both the hot and cold handles to relieve pressure on the system. When the pipe begins to thaw, the blockage will try to come through, and if the water is not released, you could end up causing further damage.  

Options for thawing exposed pipes

Though it might be tempting, never begin your thawing process at the source. Always start thawing near the faucet, and work your way down to the blockage. If you start thawing out the blockage first, the released ice will build up even more and create more pressure inside the pipe, leading to exactly what you’re trying to avoid: a burst pipe.

Fully thawing exposed pipes requires that you continue to apply pressure until the running water is fully restored. Here are some easy options for warming an exposed frozen pipe:

  • Hair Dryer
  • Hot Towels
  • Space Heater
  • Electrical Heating Tape

Options for thawing enclosed pipes

Frozen pipes that cannot be accessed by hand are a bit more tricky to deal with, but not impossible. Here are some options for thawing out this type of pipe:

  • Increase the temperature in your home
  • Infrared lamp–placed in front of the wall where the pipe is located
  • Last resort: cut out a section of the wall and access the pipe. (Call a professional).

Safety tip: NEVER thaw out a pipe using an open flame. This can damage the pipe and cause flooding, or even start a fire in your home.

If you are working on your frozen pipe and the pipe bursts, immediately shut off the main water line to your property and call a professional to help. For expert assistance in the South Plains, call Lowery Plumbing Heating and Air Conditioning for high-quality, dependable and affordable home solutions. Contact us at (806) 741-0519 or visit https://www.trustlowery.com for more information.

Leave a Reply